Maldiveses Aluminium Barstool Made in Turkey

MALDIVESES ALUMINIUM BARSTOOL

If you are looking to revamp the decor of your bar, pub, or restaurant, RCF has a wide variety of options to choose from. In Turkey, you may find the best examples of cutting-edge architecture that don’t skimp on practicality or amenity.

Invest in a pair of beautiful, Turkish-made Maldiveses aluminium barstool to make the most of your bar or party area outside in inclement weather.

THE BAR STOOL SEAT HEIGHT

The exact height of the seat on the bar stools is one of the most important details to think about and get right. If the seating is at the right level, both you and your guests will be comfortable. If the bench is too high, your thighs may have to squeeze under it, and if it is too low, you may have to reach up to sit down.

Seat heights on indoor and outdoor bar stools typically range from 29″ to 32″. With a standard bar top height of 40 to 42 inches, the guest is at a pleasant working height. When selecting bar stools, take into account the height of the top of the bar and how high the arms will be. Arms must be able to tuck behind the bar so that guests don’t have to stoop over to get their meal or drink.

Bar stools built in Turkey often include lightweight aluminium construction and a wide variety of unique designs. Stain, fade, fracture, and chip resistance are built into each and every one of RCF’s commercial outdoor bar stools that are produced in Turkey.

COMFORT

Even while it’s commonly believed that bar stools with higher backs are more comfortable, the ergonomics and seat material can also affect how often you have to clean them and how much maintenance they demand. If your bar stool doesn’t have a back, it will be easier to store beneath your counter. Indeed, the intended purpose of your bar stool with backrest will determine the model you ultimately choose on. If you’re shopping for a bar stool with a back, prioritize the seat height in relation to the tabletop.

STABILITY AND STRENGTH IN DESIGN

You should think about the bar stool’s back, armrests, and footrests in addition to the stool’s color and design. Comfort and practicality are two factors to consider while shopping for outdoor stools, regardless of the design you choose.

Aluminium is cast from three-dimensional molds, so there is an incredible range of styles to choose from in aluminium furniture. Many wrought iron patio furniture pieces are heavier, more expensive, and more aesthetically beautiful than their aluminium counterparts. You can get the same durability and longevity out of aluminium patio furniture that has a vintage or retro look.

Aluminium patio sets are the best way to go for a contemporary outdoor living area. If you need something that will survive the elements without weighing you down or becoming rigid, aluminium is your best bet for outdoor use. While most traditional patio furniture is designed for covered areas and should be brought indoors when not in use, RCF’s aluminium bar stools made in Turkey are built to be outdoors all year round and require minimal upkeep.

LITTLE TO NO UPKEY

Cleaning aluminium bar chairs is often as simple as spraying them off with a hose, in contrast to the outside hardwood stools that require regular upkeep. These barstools can survive rain, snow, and sunshine with no problems. Therefore, the best outdoor bar stools for convenience of maintenance are those made of aluminium.

PROPERTY CARE AND MAINTENANCE

The powder coating on the aluminium metal frames that Restaurant Chair Factory imports from Turkey is a nice touch. To clean, it’s best to use a gentle cloth and a light soap solution in warm water. Avoid using bristle- and abrasive-based cleaning products and brushes on the surface. After cleaning, make sure to always give the area a good rinse and a good drying.

Outdoor furniture should be protected from the elements by using outdoor covers when not in use or when leaving pieces outside in inclement weather. Before you cover the cushions, make sure they are completely dry. It is necessary to separate the cushions. Keeping outdoor furniture dry and stored away for the winter is essential, especially in colder climates. Water can still collect and freeze in the frames, cracking the finish and eventually breaking them, regardless of whether or not there are drain holes.

Frames in coastal places need to have the salt routinely cleaned off of them because it is so harmful to all metals and can cause the finish to corrode, discolor, and/or blister. Last but not least, there are aftermarket treatments available to keep or restore powder-coated surfaces’ UV and water repellency and luster. Use as needed.

CONCLUSION

If you have access to reliable information and guidance, selecting the ideal outdoor bar stools for your space will be a breeze. Seat height, practicality, and material and durability are the most crucial factors to think about while choosing outdoor bar chairs.

Each outdoor bar in Turkey must have colorful bar stools from the Restaurant Chair Factory collection. Your outdoor dining space will have a more modern look and feel if you use RCF’s collection. The Maldiveses Aluminium Barstool is just one example of the high-quality garden and outdoor seating that RCF manufactures in Turkey for our discerning clientele. All outdoor furniture from RCF is guaranteed to be reasonably priced without compromising on quality. There is no request too big or too small for the Restaurant Chair Factory to handle.